Zurück zum Blog
Anleitungen 2026-11-17 Buy Soccer balls, Handballs, Futsal balls from SELECT 0 Aufrufe

Club DB v23 Training Ball: Daily Use and Care Guide

Club DB v23 Training Ball: Daily Use and Care Guide

Keep your Club DB v23 training ball in shape with a practical routine for cleaning, air pressure, storage and knowing when to replace it.

Start with what the Club DB v23 is built to handle

The Club DB v23 is a training soccer ball designed for daily use. Its dual bonded panels are both machine stitched and sealed with glue, which helps reduce water uptake. That construction matters for care: you can clean it without worrying that every wet wipe will soak into the seams.

The cover is a 3 mm textured TPU laminated with foam to increase softness. The SR bladder is used to keep weight and secure optimal air retention. These details tell you what to protect: the cover's texture, the bonded seams, and the bladder's ability to hold air.

Club DB v23 construction details that guide care

  • Club DB v23: Dual bonded panels - both machine stitched and sealed with glue for less water uptake Bonded seams resist water better than stitched-only seams, so routine cleaning is less risky, but you still want to dry the ball fully.
    Club DB v23
    Club DB v23
  • Club DB v23: 3 mm textured TPU cover laminated with foam to increase softness The textured TPU surface can trap dirt; cleaning it gently preserves the texture and softness.
  • Club DB v23: SR bladder used to keep weight and secure optimal air retention Checking air pressure regularly helps the bladder do its job and keeps the ball's weight consistent.

A simple post-training cleaning routine

The supplied information does not include specific cleaning products or drying times, so stick to conservative steps that avoid forcing water into the seams.

  1. Wipe off loose dirt and grass: Use a dry or slightly damp cloth to remove surface debris before it gets ground into the textured TPU cover.
  2. Clean the cover gently: A soft, damp cloth is enough for everyday dirt. Avoid harsh brushes or solvents that could damage the textured surface or the foam lamination.
  3. Dry the ball fully: Wipe away excess moisture and let the ball air-dry completely before storage. The dual bonded panels reduce water uptake, but they do not make the ball waterproof.

Air pressure tips for consistent training

The catalog does not specify a recommended PSI for the Club DB v23, so check with the manufacturer's markings on the ball or your coach's guidance. What the supplied information does confirm is that the SR bladder is used to keep weight and secure optimal air retention. That makes regular pressure checks a practical habit.

  • Check pressure before each session: A quick squeeze or bounce test can reveal a soft ball. If it feels noticeably softer than usual, top it up according to the pressure guidance on the ball.
  • Use a proper pump and gauge: An accurate gauge helps you avoid overinflation, which can stress seams and the bladder over time.
  • Inflate gradually: Add air in small bursts and recheck, especially if the ball has been sitting deflated for a while.

Storage habits that protect the bladder and cover

Store the Club DB v23 clean and dry, away from extreme heat and direct sunlight. The supplied information does not include specific temperature limits, so use common sense: a cool, dry place is better than a hot car trunk or a damp garage floor.

Avoid leaving the ball pressed under heavy equipment for long periods. While the catalog does not make claims about shape retention under load, keeping it in a ball bag or loose net helps it keep its form between sessions.

When to replace a training soccer ball

The Club DB v23 is described as excellent for all youth levels as well as adults on limited budgets, so it is built for regular training. Replace it when the signs below appear, rather than waiting for a blowout.

  • Persistent air loss: If the ball keeps going soft soon after inflation, the bladder or valve may be failing. Check the valve for leaks first; if it still loses air, replacement is the practical choice.
  • Visible seam separation: The dual bonded panels are stitched and glued, but if you see gaps or lifting at the seams, the ball's structure is compromised.
  • Worn or smooth cover: The textured TPU cover can wear down with heavy use. When the texture is gone and the ball feels slick, it may no longer give reliable touch for training.
  • Shape distortion: A ball that no longer rolls true or looks out of round affects training quality. The supplied information does not specify a lifespan, so judge by condition.

What the supplied information does not settle

The catalog does not provide a recommended air pressure, specific cleaning agents, drying times, or a replacement interval for the Club DB v23. Use the ball's own markings and your coach's guidance for pressure, and rely on condition rather than a calendar for replacement. The player's number feature is mentioned in the product details, but the supplied information does not include instructions for using it, so refer to the ball's packaging or the manufacturer's guidance for that feature.

Verwandte Artikel

Customer Service
Startseite
Produkte
Warenkorb
Profil